Глубже не лез ,чтото страшно стало ,а вдруг там жизнь есть ,типа фурье бацилы :-)
полез я однако глубже.............
после удаления сего творения STX 3.9.0 RC1 с компа, вдруг обнаружились перестройки параметров bios
комп чихать стал и плакать лечил не долго касперской микстурой
что то там не чисто

Замечен FEKO 5.5 PLATINUM лицензия до 2100 года на FTP знаем какой

Не программа а набор тестовых радио сигналов от "Вейвком" Трафик! 600 Мегабайт.

Вышла третья версия микс вин, по традиции как всегда на Рождество:

тут http://mixw.net/

В связи с этим: http://www.wrplus.altervista.org/

WRplus SDR by Sandro Sfregola
A Software Defined Radio program derived from the base code of Winrad,
written by Alberto di Bene I2PHD



Dear WRplus users,

first of all I wish to thank you for your interest and enthusiasm about WRplus:
as a matter of fact WRplus is currently used by thousands of radio enthusiasts
around the world and thanks also to your feedback and advices it has become
the most popular, non commercial SDR program for radio reception.
There are some very important news: the success of the “WRplus project” has
brought to its acquisition by a new company in the field, so it’s going to be a
commercial product with all the related benefits; in the near future a new
software, which will collect the legacy of WRplus, will be available featuring a
completely renewed user interface and several more options.
I’ll be in charge of the development of this new program and I’ll do it as a day job.
The goal will be to obtain the best user friendliness, performance quality and
efficiency: of course all your advices collected so far (and in the future) will be
considered in the development.
The WRplus email will continue to work: I’ll be glad to still receive your advices
but please don’t ask for a new release of WRplus.
Also, you will find news and links related to the new software on this web page so stay tuned!

Sandro Sfregola




Леченная от триала: http://doris.kiev.ua/RS/WRPlus/

О . Спасибо за wr+

Вот еще джава декодер фри проджект:

https://github.com/IanWraith/Rivet

Currently the program decodes the modes XPA , XPA2 and CROWD36 (partiall) but more modes will be added soon.
The program can decode directly from your PCs soundcard or from a WAV file (mono and using a sample rate of
11.025 KHz or 8 KHz).

их яху групп http://groups.yahoo.com/group/enigma2000/

как ее запускать и что она может?

Вот еще джава декодер фри проджект:
Схавал кроуд:


16:12:57 Loading file X:HAMCROWDWAVCROWD36IRS.WAV
16:14:19 WAV file loaded and analysis complete (127463 samples read)
16:14:50 Loading file Z:/WAV/CROWD36TONECALL.WAV
16:14:53 CROWD36 Sync Tones Found (Correcting by 417 Hz) sync tone difference 953 Hz
16:14:53 Symbol timing found at position 3918
QQQQQQQQQQQQQQQQQQ<fs><fs><fs><fs><fs><fs><fs><fs><fs><fs>8181818181818181818181
818181818181812111Щ111Щ11111111111Щ1Щ1111111111111
11111111111111111111ЮЮЮЮЮЮЮЮЮЮЮЮ1<*10>==Э?<*10>=2Э?<*10>==Э?41
111=1111124 18
Lowest frequency 682 Hz : Highest Frequency 2385 Hz
Low 10 T0,88 T1,4 T2,3 T3,6 T4,0 T5,0 T6,1 T7,3 T8,2 T9,12 T10,3 T11,1 T12,0 T13,3 T14,10 T15,0 T16,0 T17,0 T18,0 T19,0 T20,0 T21,0 T22,0 T23,0 T24,18 T25,0 T26,0 T27,0 T28,0 T29,0 T30,0 T31,0 T32,0 T33,0High 0
16:14:54 WAV file loaded and analysis complete (36576 samples read)

Раз уж есть такая тема, попиарю свою программу: база частот этого сайта теперь доступна на iPhone.

База частот, программа (приглашаю к тестированию) - Страница 6

Вышел Code300-32 Version 3.09


что нового:


New Release

We are happy to annunce the new software relase of Code300-32 Version 3.09 is available !

There are some new modes included :

Standard version includes now
Pactor II FEC
Link 11
Codan Chirp

Extended version includes now :
Codan 9001/3012
Codan Chipr
Codan Coverter (to recover fax, doc, pictures, text, ecc. ecc.)
Pactor III HOKA
Pactor II FEC
Link 11


осталось только завидовать что кто то нажимает кнопки.

Приветствую форумчане! По работе солкнулся с Anritsu 331E, есть у кого описание, настройка, конфигурация на русском? На сайте производителя все на англицком мало понятно :(

27 марта SpectrVue обновилась до версии 3.24

1.Added new phase display mode.
2.Added new squelch external messages.
3.Added partial support to Icom IC-756Pro III and Elecraft K2.
4.Fixed external radio real mode record/playback inverted spectrum bug.
5.Added programmable CW ID to NetSDR.

http://www.rfspace.com/RFSPACE/SpectraVue.html